GOCO are an approved and accredited suppliers and applicators of all Giromax coatings. We provide a 10-year insurance backed guarantee on all Giromax products including GIROCIL Asbestos, GIROSIL GUTTER, GIROSIL EDGE and GIROSIL Roofcoat RC Systems.

These are among the most effective UV and corrosion resistant coatings for the refurbishment of commercial roofing and cladding. As Giromax approved applicators, GOCO are trained to the highest standard and receive full technical support and assistance when working with these coatings.

GIROMAX GIROSIL ASBESTOS

The Problem
Occupiers of buildings built before 2000 have a duty to manage the risk from asbestos, and roofs clad in asbestos cement present a special maintenance problem. Sheets are fragile and often cracked, loose corroded fixings leak and the dangers of disturbing the asbestos sheet means even the simplest repair must be carefully planned to prevent the release of harmful fibres. Roof replacement is costly and disruptive. Over-sheeting adds weight, risks condensation and disturbing the roof by drilling fixings, all without addressing the underlying problem of the deteriorating asbestos cement substrate

The Solution
GIROSIL® is a safer and more cost-effective solution to the problem – a fully breathing moisture tolerant coating that will not crack or blister. Using GIROSIL® BaseCoat AND Sealant to treat and seal bolts, it encapsulates the sheet to provide an enduring, weatherproof membrane, allowing the sheets to remain undisturbed – eliminating the cost and disruption of removal. Solvent free, solar reflective GIROSIL® RoofCoat RC coating provides outstanding resistance to weathering to retain lasting flexibility and adhesion without cracking or peeling. It can easily accommodate sheet movement and remains unaffected by UV and temperature extremes. Fully moisture tolerant, it can be applied in the wet and hardens to a tough elastic coating with high impact and dirt resistance.

ASBESTOS CEMENT SPECIFICATION
GIROSIL® is applied by spray, brush or roller to structurally sound asbestos cement (AC) sheeting. This guideline specification, given in good faith, without prejudice or liability is issued for the coating and encapsulation of asbestos cement sheeting. Water ingress issues commonly associated with such refurbishment should be addressed by specifications prepared by Giromax for individual project requirements. Product Technical and Safety Data must be observed at all times and are deemed part of this specification

KEY PERFORMANCE FEATURES:
• Fully Moisture Tolerant
• Impact & Dirt Resistant
• Fully Breathable Coating
• Solvent-Free Coating
• UV & Temperature Stable
• Permanent Flexibility

GIROMAX GIROSIL EDGE

The Problem
Profiled steel roofing has significantly improved in recent years, including at the cut edges where increased substrate protection and improved lap sealing combine to support a 40 year sheet life expectancy. On older roofs however, the cut edge remains vulnerable to the double hazard of “topside” and “reverse side” corrosion. Overlaps especially can be affected as harmful pollutants held in capillary drawn rainwater attack the steel substrate of this critical roof detail.

The Solution
GIROSIL® is the revolutionary next generation of coatings from Giromax, designed to treat both the top and reverse side of the cut edge through advanced corrosion treatment and encapsulation. Uniquely, both GIROSIL® BaseCoat AND Sealant stabilise the substrate using laminar flake technology that seals and bonds with corrosion. Solvent free GIROSIL® Edge RC-E then prevents rainwater re-entering the lap. It can easily accommodate sheet movement and remains unaffected by UV and temperature. Fully moisture tolerant, it can be applied in the wet and hardens to a tough elastic coating with high impact and dirt resistance.

CUT EDGE CORROSION SPECIFICATION
GIROSIL® is applied by brush or roller to structurally sound substrates that are clean, wiped dry and suitable for treatment. This specification is given in good faith, without prejudice or liability. Product Technical and Safety Data must be observed at all times and are deemed part of this specification.

GIROMAX GUTTER

The Problem
Gutters are designed to hold rainwater to manage flow and control drainage and this often determines their long term condition. If poorly maintained, blocked outlets, polluted standing water, silt and plant growth can all impede performance and lead to substrate failure.

The Solution
GIROSIL® Gutter RC-G is a revolutionary new protective coating system designed to fully treat the gutter through anti-corrosion treatment, joint and substrate encapsulation. Uniquely, both GIROSIL® BaseCoat AND Sealant stabilise the substrate using laminar flake technology that seals and bonds with corrosion. Solvent free GIROSIL® RC-G then seals the gutter substrate. It can accommodate movement and remains unaffected by UV and temperature. Fully moisture tolerant, it hardens to a tough elastic coating with high impact resistance and remains unaffected by standing water.

GUTTER TREATMENT SPECIFICATION
GIROSIL® is applied by brush or roller to structurally sound substrates that are clean, wiped dry and suitable for treatment. This specification is given in good faith, without prejudice or liability. Product Technical and Safety Data must be observed at all times and are deemed part of this specification.

GIROMAX ROOFCOAT RC

The Problem
Profiled Metal has a long serviceable life if maintained. But neglecting repaint guidelines can mean the owner faces early roof replacement. Over-sheeting is not the simple answer it first appears. It can be of poorer quality than the sheet substrate or coating being replaced, with problems of weight, condensation, leaks and of meeting current building regulations. On the other hand, choosing the wrong re-coating material can mean expensive repainting every 10 years.

The Solution
GIROSIL® is the revolutionary next generation of coatings from Giromax, designed to provide protection equal to, or better than the original through advanced corrosion treatment and encapsulation. Uniquely, both GIROSIL® BaseCoat AND Sealant stabilise the substrate using laminar flake technology that seals and bonds with corrosion. Solvent free GIROSIL® RoofCoat RC coating provides outstanding resistance to weathering to retain lasting flexibility and adhesion without cracking or peeling. It can easily accommodate sheet movement and remains unaffected by UV and temperature extremes. Fully moisture tolerant, it can be applied in the wet and hardens to a tough elastic coating with high impact and dirt resistance.

METAL ROOF COATING SPECIFICATION
GIROSIL® is applied by spray, brush or roller to structurally sound profiled metal roof sheeting. This specification is given in good faith, without prejudice or liability. Product Technical and Safety Data must be observed at all times and are deemed part of this specification. This specification is not suitable for Galbestos. Contact Giromax for further guidance.

Please contact GOCO for further assistance on how our Giromax products can assist your company.

Our Suppliers